Don't know if this really fits in here but as Rik was talking about this heads...
Erin sent me one of Riks and I wanted to find a way to attach it without the side tab. (In truth I cut this off and then thought, ah! Thats what this was for!)
Had a trawl on LOBP and decided to give the nut-dropped-down-pole-taper method a go with a slight tweak. Rather than just relying on friction/press fit to stop the head turning, I filed 4 teeth into the end of the pole and didn't drill the head at the end for the pole, just for the screw.
Now the screw pressure pulls the teeth into the plastic of the head and stops it turning. It's held up for a few sessions now so I'm happy.
@JOL
Don't know if this really fits in here but as Rik was talking about this heads...
Erin sent me one of Riks and I wanted to find a way to attach it without the side tab. (In truth I cut this off and then thought, ah! Thats what this was for!)
Had a trawl on LOBP and decided to give the nut-dropped-down-pole-taper method a go with a slight tweak. Rather than just relying on friction/press fit to stop the head turning, I filed 4 teeth into the end of the pole and didn't drill the head at the end for the pole, just for the screw.
Now the screw pressure pulls the teeth into the plastic of the head and stops it turning. It's held up for a few sessions now so I'm happy.