You are reading a single comment by @deleted and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@deleted
track hubs are 120mm standard. many can be converted by adding spacers between the cone nut and lock nut, (available from www.velosolo.co.uk), if the axle is long enough. for example, my zenith hub's axle is too short, so i couldn't respace it from 120 to 130 as then the track nut would not thread on very far.
have you measured the distance between the rear drop outs? and it is 130? if this is the case, you want a 130mm spaced hub, or respace a 120mm spaced track hub. the O.L.D. stands for "over locknut dimension" (see http://www.sheldonbrown.com/gloss_n-o.html#old), and should match the spacing of you frame.
hope this helps.