Front wheel appears fine., except the valve as mentioned.
On the rear wheel, the spokes closest to the camera all need to be rotated two holes clockwise along the rim, ( or the opposite side spokes moved two holes anticlockwise.)
Two crossing spokes (talking about the last crossing, furthest from the hub) should form a nice isosceles triangle with the heads as two vertices and the crossing point as the other. Your triangles appear skewed, you can also see spokes overlapping the head of adjacent spokes, this is not good. Your valve will be in the wrong place again. It's not the end of the world.
disclaimer - as RPM says, it's hard to tell.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.