For Sale: Big clearout, rack, frame, carbon fork, 531 fork, bars, stems, brakes, levers, etc!

531 fork, knackered frame not included. Unless you really want it. Headset included, if you can bash it out of the frame. £15

2 pairs of brake levers. V-brake levers from a couple of old mtbs I stripped. And yes, they were my mtbs. The cables and housings are still attached, and are included. GONE

Tektro 2 finger levers, teeny-tiny clamp size, for straight bars, RH lever shown £10 pair. I had one on the titec flat bar below.

Bar end lever from a Bowery flat-bar thing I think. Works in the end of charge bullhorns, etc. GONE

Iron cross grips, put on bar, very lightly used, taken off again. £5

Starfangled nut, bolt, and topcap, still in bag** £2**

(can't have a photo, I've used too many!)

Flat titec bar, 25.4mm clampsize, suitable for beater! 51cm and a gentle rise £5

Pinarello top cap and bolt, £2, seatclamp £2, seat clamp skewer £2 sized at about 27-28mm for the clamp (I only have an inaccurate ruler I'm afraid!)
(can't have a photo, I've used too many!)

2 x 25.4mm clamp bars 560mm and the other is a little less. Scratched. Pub / polo bike? £2 each

shimano r450 front brake. Deep drop, and will mount inside a fork crown, for all your fixieskidder needs. I had it in the 531 fork at the top. New fork is short drop, so it's out. Only on bike for less than 1000 miles, pads still good, nice brake. GONE

Rack, used £10 ON HOLD

53T and 39T chainrings, 130bcd 3/32nds, both have been used fixed and geared £5 each POSSIBLY ON HOLD, PENDING PM REPLY

Ofmega square taper 170mm cranks, LH crank worn, so no longer strictly speaking square taper! £5 POSSIBLY GONE

Shimano 105 front mech for two ring set up£5 GONE, ultegra rear mech, low miles £15 GONE, deore rear mech, filthy but virtually unused £10

1 1/8th ahead stem £5

Chainring bolts free to the first person to buy cranks or a chainring

Bottle cages £5 the pair

40cm italian made ITM drop road bar, relatively freshly taped. Complete with shimano 105 STI 10speed shifters. £50 DIBSED. Willing to split, but that means de-taping the bar.

Orbea team replica frame, from when the team was euskatel...2000-something?? Well used (cable rubbed through paint on the headtube), and really quite light. Replaceable rear hanger, with two spares. 57cm from bb to top of seat clamp, and 54 from seat tube to top tube, as best I can measure. Nice light roadie frame, upper braze on for seat tube bottle cage is loose, but still holds a bottle cage. Includes BB, cane creek headset, seatclamp, and carbon fork. Forks are black at the top, and fade to the visible carbon weave at the bottom. They are also used, and well marked, but work fine, no cracks at all to my eyes. Clamp on front derailleur for sale below. Takes a 27.2mm seatpost. £75ono DIBSED

Balls, forgot to say, forks are 1" steerer

ITM big one stem 25.4mm clamp £5 1" steerer, negative shim available to 1 1/8"

shimano 105 rear brake short drop, could be used up front I guess. £10

**All prices are CASH AND COLLECTION ONLY. From SW1 evenings or lewisham daytime from tomorrow until friday lunchtime of this week. I want shot of it all, and my wife wants the kitchen back. Make me a cheeky offer, especially if you want more than one thing. After friday, I'm only about at weekends, so collection SW1. No postage I'm afraid, on a few quid of jumble stuff like this I just can't justify it.

**Send me a PM if you want anything.