You are reading a single comment by @MR_PANIER and its replies. Click here to read the full conversation.
  • I had the same problem. It was working fine until I had to change a puncture.

    I have found that the looser the gear cable the better. Try moving the wheel forward a little in the dropouts and allow the cable to slacken a little and see if that helps.

    If not then I shall leave you in the capable hands of Sheldon
    http://www.sheldonbrown.com/raleigh.html­

    Good luck

About

Avatar for MR_PANIER @MR_PANIER started