You are reading a single comment by @Mike[trampsparadise] and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
![Avatar for Mike[trampsparadise]](https://lfgss.microcosm.app/api/v1/files/234d264db96466e0e7aa35dd06b600d167573076.gif)
@Mike[trampsparadise]
26.0 seatpost with a bit of filler, let set and then tighten the binder bolt?
Would probably mean you would never get the post out again though.
Force a 26.2 seatpost in? Risk ruining the seattube.
26.1 seatpost if it exists, file the gap in the binder clamp a bit and tighten hard. Again you risk eventually ruining the seattube.
2 seperate partial shims in the ovalized bit? Same as suggestion 1. but you will be able to remove the post later. And it could be a pain to set up.