Don't just tighten, you need to clean the bar/stem interfaces. If they're loose, little bits of grit can get under there and cause the clicking.
Take the bars out of the stem clamp and wipe 'em down good. Put back in and tighten.
You might want to do the same with the fork clamp end - this might then require headset fine tuning.
While you're at it, check for any fine lines or cracks around welds/joins.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.