You are reading a single comment by @MrE and its replies.
Click here to read the full conversation.
-
Scrub with wet baking soda (mainly for it's mild abrasive qualities) - rinse - wipe with spirit vinegar (chemistry) - rinse (distilled water if possible) - clean once more with isopropyl alcohol - if things still don't stick, you'll probably need your other textured plate...
MrE-
Somehow the stickiness issue spread to my other plate, swapped in a resin plate i was sent to review and full plate thin walled print is sticking to it perfectly, faultless first layer, no warping.
No idea what is up with the two textured plates though. Been working fine up until now and my printing activity is very low volume.
HatBeard
having some adhesion issues with my textured plate and warping so thought i'd give the "dish soap" cleaning advice a go.
now nothing sticks to it at all.
try to search for info on how to remedy, only find results saying how perfectly it works.
luckily i have 2 textured plates so i can leave it for another day. but wtf.