You are reading a single comment by @Mr_Smyth and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Mr_Smyth
So with my limited knowledge and google I managed to get the 5G router in pass through mode and the 2 Linksys up an running though the Three 5G router app interface and software is shonky as hell, I had to reset the router to factory and while doing so had to give it a password which was different to that on the bottom of the device as it needed a #/special character so I gave it the same one but with the #. Surely it should default to what’s on the bottom label?
The Linksys don’t like blockwork/concrete though so had a few dropouts but moving the child node a bit to the right and it’s been stable and a good signal now all round the flat.
Now I need a small shelf/wall bracket for the router but the one Linksys sell while nice and neat appears to be for WH/01-03 series models and not the MX5500 series. A slightly less aesthetic solution from Amazon doesn’t fit as the clips to secure the node are too big and obviously for a bigger model.
Anyone found a neat solution for this? Preferably in white or grey?