Brother All Day - LEJOG machine?

You are reading a single comment by @Aroogah and its replies. Click here to read the full conversation.

•

Nef

Also, looking at PDW fenders
https://www.condorcycles.com/products/portland-design-works-full-metal-fenders-city?
Slight concerns about how they’d fit due to the numbers in their fitting guide. Think they’re all ok except A and C are about 8mm on the brother.

•

Aroogah in reply to @Nef

I had a pair of the road ones on a fixed frame. IIRC, the hardware on the bridge / fork mounts would be difficult to modify to give you enough movement. I think then you would hit clearance issues with the mount hitting the bottom cup of your headset. I would err on the side of flexibility here. VO/Honjo are good options. SKS are just fine too. Don't forget customised Raw mud flaps too.

•

Nef in reply to @Aroogah

Ah, looking at the fork I think you’re totally right about that.
Back to the drawing board.
•

Nef in reply to @Aroogah

Just remembered I actually had this problem on the last build, just spaced the clip away from the fork to make some clearance.

About

Avatar for Aroogah @Aroogah started