-
a link
To be honest, I just walked in, with a tape measure, and opened a pack or two.
I'll have a look online though.
Your setup sounds a bit odd - tado needs all rads controlled, or it doesn't really work.
NotThamesWater-
Your setup sounds a bit odd - tado needs all rads controlled, or it doesn't really work.
Not unless I’m very much mistaken. Set up with communication from Tado. Works fine for me, just that some rads (hallways/bathroom) come on when any other room comes on. In general I’m happy with that, but would prefer them to be limited by a thermostatic valve so they don’t just blast the whole time. Bathroom has a basic trv and it never seems overly hot or cold.
Edit - if you do find a link, that would be great. It’s a minefield and a long trip to a Wickes so want to know they have it.
cjr
Thanks, any chance of a link. I’m looking at lots of things that look really similar!
I’ve set the offset, but it doesn’t really work for me for two reasons.
A) my partner thinks the room is @ 16deg when it’s not and puts the heating on for no reason.
B) when the rad is off, Tado thinks it’s 3deg colder than it actually is because the thermometer is reading actual room temp, then subtracting 3. When the rad is on, Tado ‘thinks’ it’s 22deg in the room while reading 25 then subtracting 3. But the far side of the room is barely 20.
A separate stat in each room would be best but ££££. I would just like it a bit more true to life, rather than an expensive on off switch.