This is a Flyxii FR-602 unpainted, unbranded carbon frame in 51cm. This size chart might be correct.
Freecycle because the drive side dropout is damaged. In particular when changing the rear hanger the steel plate that the axle squeezes against separated from the frame and I've never been able to permanently re-attach it. You can install a wheel and ride it just fine, but if you need to remove the wheel the plate invariably comes loose each time and must be carefully repositioned to reinstall the wheel. The hanger bolts protrude too much to make riding without the plate a possibility.
The frame takes a standard threaded BB, tapered headset/fork, 31.8mm seastpost, 34.9mm clamp. 135mm QR wheel, post mount brakes. Will take Di2 or cable gearing. It has never had a front mech fitted and the factory internal cable placeholder is still in place. Two bottle cages. Has mudguard eyelets plus threaded holes on the BB and back of the seatstay bridge.
This is a Flyxii FR-602 unpainted, unbranded carbon frame in 51cm. This size chart might be correct.
Freecycle because the drive side dropout is damaged. In particular when changing the rear hanger the steel plate that the axle squeezes against separated from the frame and I've never been able to permanently re-attach it. You can install a wheel and ride it just fine, but if you need to remove the wheel the plate invariably comes loose each time and must be carefully repositioned to reinstall the wheel. The hanger bolts protrude too much to make riding without the plate a possibility.
The frame takes a standard threaded BB, tapered headset/fork, 31.8mm seastpost, 34.9mm clamp. 135mm QR wheel, post mount brakes. Will take Di2 or cable gearing. It has never had a front mech fitted and the factory internal cable placeholder is still in place. Two bottle cages. Has mudguard eyelets plus threaded holes on the BB and back of the seatstay bridge.
Collection N19 (Archway / Upper Holloway)
3 Attachments