You are reading a single comment by @aniki and its replies. Click here to read the full conversation.
  • Is the chain whip definitely 1/8" specific? I can't think of any reason why it would slip due to the width of the teeth unless it was a 3/32" whip which was only engaging on the top edges of the beveled teeth.
    Velo Solo sprockets are very high quality and will likely out last all the others...

  • Thank you, that gives me some comfort - I do usually like VeloSolo components but haven't seen something like this before. Chainwhip is definitely 1/8" specific, mounted dozens of other sprockets with the same tool. It works with the VeloSolo sprocket but only when the chain is completely wrapped around the whole circumference of the sprocket and tension carefully applied, I didn't have to engage the chainwhip so carefully with the others.


Avatar for aniki @aniki started