You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Howard
A wheel builder should be able to make a custom build with the correct spoke lengths. Not sure why there would be an increased chance of rim failure as long as the tension is balanced; IIRC Ai pulls the rim closer to the centreline of the hub so if anything the wheel should be stronger.
FWIW I use OTP wheels re-dished on my 2016 F-Si and I haven’t died.