You are reading a single comment by @sacredhart and its replies. Click here to read the full conversation.
  • Swapped out my susp fork for rigid.

    The rigid fork requires an adaptor to fit the disc caliper.

    On the susp fork the caliper had a little float when I loosened the bolts. Pull the brake lever to centre the caliper and tighten all good.

    On the rigid fork with adaptor I have to slacken the bolts several turns to get any float. Using the above technique the brake still rubs.

    Any advice on anything else I can try. I was considering drilling out the adaptor a touch to give a bit more float.


Avatar for sacredhart @sacredhart started