Ah okay. I’d have taped the underside and plugged from the top with some grommets. But then, I prefer to leave the rough parts on the bike!
My stand that supports the DR is one of these. I still need to use a brick under a wheel to raise the bike enough to wedge and position it underneath.
It’s survived some abuse but can feel a little bit on the weak end of the confidence inspiration scale. Mine came through the mechanics, rather than 24MX. All the same stuff from China with a badge on.
I did buy some grommets for the drilled rear fender but couldn't sleep at night. Fully aware about the levels of tartyness here, it's a way of life. That Proworks stand is exactly what I'm after, not a bad price too.
Beware with 24MX you need to add at least a tenner and a fortnight for delivery. But if you’re gonna burn a hole in your wallet there’s loads to buy to make it worth postage, they are good for doing that!
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.