Apart from the seat, I’m surprised you fitted new panels. I’m of the mind to abuse the modified, and keep the new fresh for if you ever need to replace them (ie sell). That way your first few scratches don’t damage the new panels.
I made my Sherco stand half-drunk, and fluxcore wired some steel together with the mig, then popped a piece of wood and foam on top. Your woodwork looks a lot more beautiful.
Main piece of advice, make a little wedge-ramp, or two, around the height of a brick. This is what I use with the DR even with a proper little stand. I pop the front/back wheel onto a brick, then slide the stand underneath.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.