I'll ask in the wheel building thread but thought this might be a good thread:
I'm regularly dealing with 12g & 13g spokes and big nipples 🤭
I'm getting tired of using a cheap multi spoke wrench. I'm guessing the (puctured) Hozan offering is of a similar quality, and is probably as annoying to use. I could be wrong, anyone have any experience with these?
For anyone also regularly working on 12g & 13g, what nipple wrench(s) are you using?
The Park Tool SW-0/1/2/3 range are pretty comfy to use. There are 4 sizes up to 4mm so check which one you need. The red one fitted the slightly bigger nipples on my wheel.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.