I’ve wondered about doing it before but would need to cut it all by hand.
I have a plan where I could do a relatively straight cut on the top and down tubes and then sleeve some larger tubing over and mitre it to the new headtube. Would allow stretching of the frame as well as making cutting the mitres easier.
Sort of used a similar technique when I built this...
Fixed a REALLY well used bianchi frame today.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.