I was in the same position but these never came up in any searches. Someone else on here linked me to them actually - can’t remember who. They’re not the prettiest of forks, but I couldn’t find any other 1” disc forks anywhere other than the barnacle.
I’ve not actually put them on a bike yet - got a frame inbound that they’ll go on. The axle to crown is about 400mm if that helps. If I remember, I’ll pop a wheel in them tomorrow and get a photo.
yeah i've been searching eBay and google for so long and nothing appropriate came up. They cant be worse than the forks i've got on at the moment and they're going to clean up my threadless to threaded adapter disaster of a cockpit. Thanks a lot, my current ones will only fit a 25, so even a 28 would be much better.
They’re basically 26” mountain bike forks so they’ll have plenty of clearance for 26” wheels. I did try a 650b wheel with a 47mm tyre on it as it happened to be at hand - that was fine, with clearance for mud.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.