-
BBright accepts anything longer than BB30 cranksets. the spindle of a bb30 chainset is too short for anything else than pure bb30 frames. so you you could get a new longer spindle if it is a hollowgram crankset, or new cranks.
i have a cervelo specific rotor 3d crankset (with a thicker spider that acts like a spacer) and balances out the assymterical bb you linked.
also pretty easy to find cheap TT bars etups on ebay, to try out at least and see what you like. I got a pretty nice full Vision carbon TT cockpit for 35 £ that i used on my fixed for a while.
-
Any suggestions where I can find a post? Everywhere seems out of stock, even the Cervelo site. I assume there are no budget alternatives to the Cervelo one?
Last one I got was from eBay. I don't think there are any non-Cervelo seatposts which are compatible.
BBright = BB30 but wider on one side, yes? So my BB30 chainset would work with something like this: https://wheelsmfg.com/bottom-brackets/bbright/bbrighttm-outboard-abec-3-bb-for-30mm-cranks-black.html
Depends which cranks you have. As Glws says, if it's a 'proper' BB30 chainset it won't fit. If it's a 386EVO chainset with a longer spingle, like a Rotor 3D+, then it will.
Any suggestions for budget bar setups? This is a world I am new to and it scares me.
Zipp Vuka Alumina base bars and extensions are reasonably cheap and very adjustable.
You are reading a single comment by @keepit and its replies.
Click here to read the full conversation.
Glws
Brommers
@keepit
Just invested in my first Cervélo and need some assistance please forum.
I've been doing some fun TT stuff and plan to do a half IM next year, so have been looking for a budget(ish) setup. Bike24 had a 2018 P3 frameset for around £550, which seemed like a good deal. Unfortunately, after my impulse buy, I discovered that it doesn't come with a seat post and these are bloody expensive and hard to find. I have some questions...(probably should have done some research first):
TIA. This is the frameset (stock photo):