You are reading a single comment by @deleted and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@deleted
I machined a PVC T shaped spacer for my identical Talbot ISP gravel bike to raise the saddle height slightly.... was basically just a circular spacer, with a 5mm wall thickness, and a 20mm deep stepped lip that sat inside the ISP.
It also made for a much more forgiving ride off road, as I used a fairly soft PVC bar stock so it acted as a damper between the seatpost and the seatpost topper.
(I totally stole the idea from Look E-Post’s)
Very simple if you have a lathe.