Hey fellow steamrollers, I've got a question about fitting the pelago front rack.
The rack ends are much wider than the forks, leaving a big gap. I solved the problem by putting a spacer in between the fork ends and the rack ends, but I've been told that its highly unsafe.
How did the rest of you fit the rack on safely? Or am I just missing something?
Only fitted this rack to mounts, but have you tried attaching the mounting plate to the inside of the leg, then fitting this inside the fork? Assuming you have enough axle, it just means your fork will need springing out slightly.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.