You are reading a single comment by @Ndeipi and its replies. Click here to read the full conversation.
  • Sounds like a lot of faff ... if you can get the DS cup out, it could be solved in half an hour with a junior hacksaw / dremel and a bit of flat bar.

  • I'm guessing you grip the flat bar in a vice and rotate the frame?

    ... if you can get the DS cup out

    Yeah this is the hard part requiring the faff. My DS cup is seized to the point where the BB tool teeth are just starting to strip the teeth in the cup, as it's an alu cup.

    Anyway, I'll order the Plus Gas and report back after some soaking.


Avatar for Ndeipi @Ndeipi started