I seem to have a bit of a handlebar problem.
They are a pain to post so want to sell them locally.
1st pic, top to bottom,
Planet X/On One bullmoose. 705mm straight across the ends, 740mm if you measure around the bar. 120mm from centre steerer to centre handlebar but sweep makes brings the grip section a bit closer. 1 1/8”.
Ritchey Classic 10deg. 660mm wide, 10 deg sweep. 31.8mm clamp.
Used for one ride but slight marks from storage in with other bars.
On one Mike. 630mm wide, 65mm rise. 40 degrees backdrop, 20 degrees upsweep. 31.8mm clamp.
Good used condition. Few marks but nothing that stands out.
On One OG V2. 680mm tip-to-tip width, 25° backsweep, 6° upsweep
38mm rise, 33mm forward offset. 31.8mm clamp.
Handmade riser bars. Made from cut up bmx bars. Heavy as death. 655mm wide, about 120mm rise.
Condition, but ratty but indestructible.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.