You are reading a single comment by @M_V and its replies. Click here to read the full conversation.
  • Ye I'm starting to realise this. I have found some in America, cost an arm and a leg to get it over here though. Found another guy in the US who makes custom 1" Headsets which fit a 1 1/8" steerer but the thing with that is most of these 1 1/8" jump forks have really short steerers, my head tube is long so need to decide what I'm going to do

  • Found another guy in the US who makes custom 1" Headsets which fit a 1 1/8" steerer...

    If you go that route then make sure its a normal 1" headtube that the headset will fit.

    There's a 1" bmx/cruiser size that's not very far off 1 1/8" but it's an american thing. Loads of bikes over there use it, very few over here.

  • Ye spoke with the guy he said for this to work the ID of my head tube needs to be 32.5mm. I think thats the same as mine but I will have to measure when I get it back from powder coating

About

Avatar for M_V @M_V started