You are reading a single comment by @Skülly and its replies.
Click here to read the full conversation.
-
Hi
The measurements you’re missing are:
Flange>OLN (over lock nut)
OLN>OLN
You then work out from those the Flange>centre measurements. Very important to account for any dishing if that applies, but simply a necessary figure for calculators.Sheldon and others tell you how to do this.
Once you have that, with Flange diameter and ERD, edd or other calcs will give you your max spoke length. Round down to the next length of spokes below your figure.
Let us know if you want more help. #forumalwaysdelivers
Skülly
I seem to be easily confused with the spoke calculators online and was wondering if any knowledgeable vintage buffs could help, I am attempting to build a Harden large flange front hub onto a Super Champion Medaille d'Or sprint rim (616mm ERD) but I'm stumped on trying to find the correct spoke length, the hub flange diameter is 85mm with a 32 hole drilling, 3 x cross spokes is preferential, can anyone help? cheers