You are reading a single comment by @steelest and its replies. Click here to read the full conversation.
  • What would you do at my place?

    Not be looking at using a £500+ tubeset*.

    The document posted by @PhilDAS seems to suggest 30mm of full thickness should be left intact. If we assume Cento is the same then the minimum I'd want between the deepest parts of the mitres (ie the outsides of the abutting tubes) on the 560mm tube would be 520mm so this tube would not be suitable for a 520mm c2c toptube frame.

    I do note that the wall thicknesses on the Cento tubes are a bit lighter than on the Life ones so I'd actually want to err on the side of caution and leave a bit more than 30mm of full thickness.

    *I know you said to abstain from this kind of comment but it does sound like you are planning on building with this tubeset yourself and that you have no/very little prior framebuilding experience so I can't help but wonder if you understand that tubes with this kind of wall thickness are not going to be easy to work with? Are you planning on buying a Cento tubeset and holding onto it to build with once you have more experience?

  • Thanks for the reply!

    Are you planning on buying a Cento tubeset and holding onto it to build with once you have more experience?

    You got it exactly right! I saw the Cinelli Nemo Zagato and fell in love with that tubeset. And as I am a big fan of Columbus/Cinelli, I have a fear of missing out on this limited edition, so I want to buy the tubeset now and "freeze" it. My full plan is: full course at the bike academy in March 2020, then a few builds for friends with cheaper tubesets, and only after that, the Cento!

    I will go for Measure A then, with 530 TT. Thanks a lot!

  • I think someone else on here was thinking about buying a tubeset and stashing it away for a while.

About

Avatar for steelest @steelest started