Thanks for this. That's going to be far better but annoyingly the maximum width this accommodates is 35mm and my tap measures 42mm. Aggghh! On the hunt for a wider one.
That black plastic bit should unscrew and you can fit a connector onto the internal thread.
I'll give it a go.
@Mr_Sworld started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Thanks for this. That's going to be far better but annoyingly the maximum width this accommodates is 35mm and my tap measures 42mm. Aggghh! On the hunt for a wider one.