The bearings are pretty easy to replace - 2 x 6803 2RS bearings I think you need if it's the 17mm axle - the circlip can be a pain to get out & replace (a good sharp pick should prize it out) but it's doable & will only cost ~£8 for a couple of bearings
The Campagnolo freehub is alloy & some boiling water poured over the shell swells it enough to push the bearings out/in by hand - never done it with the Shimano version but might make things easier than simply lamping it with a big mallet
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.