You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Howard
Rotor 3D uses a 24mm axle and external screw in bottom bracket cups.
Rotor 3D+ uses a 30mm axle and either press fit or screw in external bottom bracket cups.
Assuming the Vig is threaded then you'll either need the 24 or 30mm external cups.