You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
M_V
I've recently got a 54cm Capo and am struggling to get a good chainline. The chain stays are quite chunky which is making things a little tricky!
I've a set of Omniums which could use but on offering them up, they look mega tight to the frame so I'm worried about them hitting the stays. I've also tried an older pair of primato cranks with the matching adjustable bb but when I torque them up, the NDS crank touches the frame. Could it be bent?! I then tried a 111mm ISO bb (token) which brought the cranks out but the chain ran rough due to being TOO far out! (Maybe about 8mm crank/stay gap)
I've seen plenty of Capos running both of these set ups, are people using spacers?!
Any advice would be greatly appreciated!