Picked this frame up the other day, I have no idea what it is!
Its fully chromed but only the drive side chainstay is polished. Gipiemme dropouts front and rear. Seat post is roughly 26.4-26.6 . Frame weighs about 2650 with headset cups , fork about 750.. Im thinking maybe Aelle? Not sure it seems too heavy but possibly the chrome is adding some weight?
The build quality seems pretty crude all round , the lugs are messy and rather unusual looking. - the headtube lugs are decorative at the front but very long and plain looking on the down tube, I've only seen something similar on a 1930's frame on Hilary Stone, but the rest of the frame looks more modern.
I haven't seen many raw steel frames up close , perhaps it just because its been keyed to accept paint but it looks roughly made all over, particularly the seat stay caps. There are file marks everywhere. Does a raw frame normally look this bad? How much does primer and paint cover ? Rear brake bridge is also rough, and looks as though it has been badly drilled to take a recessed caliper bolt.
The fork does take a recessed bolt and also has significantly less brake drop by about 10mm- perhaps its not original , though the crown is plain and the dropouts are also Gipiemme.
The other unusual feature is the very plain cable guides on the top tube, never seen ones like this before.
Picked this frame up the other day, I have no idea what it is!
Its fully chromed but only the drive side chainstay is polished. Gipiemme dropouts front and rear. Seat post is roughly 26.4-26.6 . Frame weighs about 2650 with headset cups , fork about 750.. Im thinking maybe Aelle? Not sure it seems too heavy but possibly the chrome is adding some weight?
The build quality seems pretty crude all round , the lugs are messy and rather unusual looking. - the headtube lugs are decorative at the front but very long and plain looking on the down tube, I've only seen something similar on a 1930's frame on Hilary Stone, but the rest of the frame looks more modern.
I haven't seen many raw steel frames up close , perhaps it just because its been keyed to accept paint but it looks roughly made all over, particularly the seat stay caps. There are file marks everywhere. Does a raw frame normally look this bad? How much does primer and paint cover ? Rear brake bridge is also rough, and looks as though it has been badly drilled to take a recessed caliper bolt.
The fork does take a recessed bolt and also has significantly less brake drop by about 10mm- perhaps its not original , though the crown is plain and the dropouts are also Gipiemme.
The other unusual feature is the very plain cable guides on the top tube, never seen ones like this before.
Any guesses ?
Sorry for the poor photos:
Cheers