London Fixed-gear and Single-speed

I'm after the following:

19t 1/8th sprocket
32t 4 hole chainring (104 BCD with no ramps for gears)
V brake calliper and lever (22.2mm clamp diameter would be best but I'm not sure if they come in that size, probably not)
Clear or glow in the dark grips (with flanges would be great)
48h goldtecs laced to sputniks or similar (not going to happen but you never know)

Trade - some alloy nitto risers with no sweep (22.2mm with 25.4mm clamp) 45cm wide for some similar (steel is ok) but wider.

I'm after stuff in decent condition and of good quality, strong/beefy is preferred. I can collect from most places in London in the new year or pay postage if you aren't in town.

oooooh, whatcha building?

alas I cant help with anything im afraid dude, all my spares are crap/buckled/rubbish.

One of these

With a pair of these

along with 96 of these

and a few other bits and pieces

how much was the damage for f+f?

Lookin killer Ed :)

It's not available until mid February but it looks like it will be £300. Unless anyone has any charge/wiggle/evans contacts they could hook me up with and get me trade.

Tom: I think there might also be a bit of this (in paint form) involved

I have the 13T sprocket, should have the 32T (DMR Saturn) ring but need to check, and a brand new never used Wippermann 1G8 chain (well, you said you wanted heavy duty) which bizarrely came with only 90 links, which is why it's unused. 90 links is just right for 32/19 on 405mm chainstays, although if you're flexible on gearing I also have an 18T sprocket.

Sounds good, pm me with an idea of what you'd be after for the lot. I'll stick with the plan for a 19t at the moment but if it doesn't work out I'll keep it in mind you have an 18t.

Thanks to mdcc_tester some parts have been crossed off the list.

Also after some widish risers.

Doh, wish you'd mentioned the risers before! I've got some 67cm wide Specialized LowRise 2014T6 in black. PM on the way!

This guy has a 19T - http://www.londonfgss.com/thread35083.html

I bought one yesterday from here:

i've got a 19t cog, but i need to swap for a 15t 1/8" cog

I have a lever with a clamp slightly less than an inch for free if you still need. It is pretty scratched though - might not be in keeping with the new build

Thinks I'll pass but thanks for the offer, nice shiny bits keep on catching my eye