A A A A
Tool library / tool exchange. Post what you got and where you are
 
LinkBack Thread Tools Search this Thread
Old 17th September 2012   #651
Dmayn91donor
 
Dmayn91's Avatar
i'll probably come up to easts drinks. Thanks!
  quote   reply
Old 18th September 2012   #652
JontyBottomleydonor
anyone got a loooooooong big spanner? for v stiff bb fixed cup.
if anyone could lend a hand i'd be very grateful!

edit: sorted now ahah, cheers!

Last edited by JontyBottomley; 18th September 2012 at 22:27.
  quote   reply
Old 18th September 2012   #653
1000archangels
 
1000archangels's Avatar
apollo does, hes close to you
  quote   reply
Old 18th September 2012   #654
JontyBottomleydonor
Sorted now thanks to a seatpost extending the length of my spanner!

Cheers but he's near 10 miles from me I reckon!
  quote   reply
Old 22nd September 2012   #655
fnisser
Hey,
I hockey-tackled a little van (turning left without indicating) a couple of days ago. The bb is a bit loose now, and anyway it probably needs a good clean and re-greasing (if things are actually fucked I might need a bit of advice). Anyone got tools for a sugino bb? While were at it I need to borrow a couple of 32 mm wrenches for tightening the headset as well.

I'll happily to offer something in return for this, perhaps even a little river cruise.
  quote   reply
Old 22nd September 2012   #656
1000archangels
 
1000archangels's Avatar
where u at?
  quote   reply
Old 24th September 2012   #657
fnisser
I'm in N4 at the moment, about to move E5, but I don't mind a little ride if necessary.

Cheers
  quote   reply
Old 22nd October 2012   #658
sorethroatdonor
 
sorethroat's Avatar
Anyone in the New Cross area have a shimano/sram external bb tool I could quickly borrow this evening?
  quote   reply
Old 22nd October 2012   #659
36x18donor
 
36x18's Avatar
I have one of these, but miles away, in Clapham.

http://www.innercitycycles.com.au/Ic...m-Bracket-Tool
  quote   reply
Old 22nd October 2012   #660
sorethroatdonor
 
sorethroat's Avatar
Perfect but taken my bikes apart so have nothing to ride to get there. Thanks anyway
  quote   reply
Old 2nd November 2012   #661
1000archangels
 
1000archangels's Avatar
so this may sound funny but my headset removal tool is too wide for 1'' cups, and the 'arms' dont quite catch the headset from inside the headtube
this led me to suspicion that my headset tool is either fucked, or made for 1 1/8only
does anybody on here have a 1'' headset removal tool please?

and yes I did successfully remove the 1 1/8th headset cups with my tool
  quote   reply
Old 2nd November 2012   #662
rogandonor
 
rogan's Avatar
drop my micycle ^ theyll let you use some
  quote   reply
Old 2nd November 2012   #663
1000archangels
 
1000archangels's Avatar
id thought of that but its two frames
  quote   reply
Old 5th November 2012   #664
se1derfuldonor
 
se1derful's Avatar
Quote:
Originally Posted by 1000archangels View Post
so this may sound funny but my headset removal tool is too wide for 1'' cups, and the 'arms' dont quite catch the headset from inside the headtube
this led me to suspicion that my headset tool is either fucked, or made for 1 1/8only
does anybody on here have a 1'' headset removal tool please?

and yes I did successfully remove the 1 1/8th headset cups with my tool
When I got my Ice Toolz Headset Remover I had to use a pair of pliers to bend out the tips to make it catch on my 1" headset. Took about 30 seconds and still works on the 1 1/8th jobs too.
  quote   reply
Old 5th November 2012   #665
Zebra Cyclistdonor
 
Zebra Cyclist's Avatar
  quote   reply
Old 6th November 2012   #666
1000archangels
 
1000archangels's Avatar
Quote:
Originally Posted by se1derful View Post
When I got my Ice Toolz Headset Remover I had to use a pair of pliers to bend out the tips to make it catch on my 1" headset. Took about 30 seconds and still works on the 1 1/8th jobs too.
didnt thought of that, thanks for the tip.
I just got a big-ass flathead screwdriver in the end
  quote   reply
Old 9th November 2012   #667
No Sense Needed
Anyone have a chainwhip and lockring tool I can borrow in the SE area?
I'm in SE23 and could ride my girlfriends to somewhere localish.

I currently need to re-grease my BB (hence the lockring tool) and change my fixed cog (hence the chainwhip and lockring tool). Ideally I need both or an all in one tool but If someone only has a lockring tool that'll help as that would make my bike road worthy again.
Annoyingly I own/ed these tools and lent them to my sisters boyfriend and he lives to far for me to collect.

Thanks
  quote   reply
Old 11th November 2012   #668
knyazb
 
knyazb's Avatar
Quote:
Originally Posted by 1000archangels View Post
didnt thought of that, thanks for the tip.
I just got a big-ass flathead screwdriver in the end
martin, i got proper removal tool if you still need it..

i need the tools to remove cup and cone bottom bracket.
got a lockring tool, but its not enough grip..
anyone got anything?
  quote   reply
Old 1st December 2012   #669
bmx_freddonor
 
bmx_fred's Avatar
has anyone got a chainwhip + lockring tool i could borrow in north west london in exchange for a few beers?
  quote   reply
Old 4th December 2012   #670
Zebra Cyclistdonor
 
Zebra Cyclist's Avatar
Yup I live in SE but work in Victoria if you can pick up from there PM me
  quote   reply
Old 4th December 2012   #671
rogandonor
 
rogan's Avatar
if you still need fred i have them both in camden
  quote   reply
Old 6th December 2012   #672
kkkkkkkk
anyone got a three stud bottom bracket lockring tool as well as a 2 peck bottom bracket shell tool i can borrow in east? thanks

and
  quote   reply
Old 6th December 2012   #673
OneLessCardigan
Quote:
Originally Posted by Zebra Cyclist View Post
you don't need to waste money on a chain tool if you have a chisel and a plunger. just use the Sheldon method.
  quote   reply
Old 6th December 2012   #674
Vesaliusdonor
 
Vesalius's Avatar
Quote:
Originally Posted by kkkkkkkk View Post
anyone got a three stud bottom bracket lockring tool as well as a 2 peck bottom bracket shell tool i can borrow in east? thanks

and
I have the first one and this:



Which should do the job?

PM me I'm in stratford
  quote   reply
Old 8th December 2012   #675
timages
Has anybody got a Shimano BB tool that I could borrow for one evening?

Based in Victoria during the week, but would be prepared to travel a bit.

Cheers
  quote   reply
Old 8th December 2012   #676
luckyskulldonor
 
luckyskull's Avatar
anyone have a Campagnolo BB tool i can use, the veloce type. north london would be ideal......... thanks
  quote   reply
Old 8th December 2012   #677
rogandonor
 
rogan's Avatar
I do but won't be in London (Camden) till tuesday
  quote   reply
Old 9th December 2012   #678
pharoahsandersdonor
 
pharoahsanders's Avatar
Quote:
Originally Posted by luckyskull View Post
anyone have a Campagnolo BB tool i can use, the veloce type. north london would be ideal......... thanks
I have one in SE10 or can meet at EC2 tomorrow. PM me if interested
  quote   reply
Old 10th December 2012   #679
Remyy
Hi all! Does anyone has a big adjustable spanner to lend ,to use for somes repairs. Myself i can lend a small multitools!
  quote   reply
Old 14th December 2012   #680
chrisbmx116donor
 
chrisbmx116's Avatar
Quote:
Originally Posted by luckyskull View Post
anyone have a Campagnolo BB tool i can use, the veloce type. north london would be ideal......... thanks
Yep. I'm by Viccy park...
  quote   reply
Old 17th December 2012   #681
apollodonor
 
apollo's Avatar
WHO BORROWED MY CAMPAG BB TOOL?

pls
  quote   reply
Old 17th December 2012   #682
rogandonor
 
rogan's Avatar
Not me but i have one you can use...
  quote   reply
Old 17th December 2012   #683
1000archangels
 
1000archangels's Avatar
oh shit it was me
it didnt fit in btw for some strange reason
can bring it back to you tomorrow mate

so sorry :S
  quote   reply
Old 18th December 2012   #684
apollodonor
 
apollo's Avatar
aaaaaaaaah!!!!

awesome!

after 2 facebook posts and loads here I find the criminal!

yes please :) I don't need it urgently, but good to know who has it finally....

see you at Easts?
  quote   reply
Old 18th December 2012   #685
1000archangels
 
1000archangels's Avatar
yeah for sure:)
sorry havent been much online, enjoying new place:)
  quote   reply
Old 18th December 2012   #686
apollodonor
 
apollo's Avatar
when are you going to invite me over baby ?
  quote   reply
Old 18th December 2012   #687
rogandonor
 
rogan's Avatar
^ get a room
  quote   reply
Old 30th December 2012   #688
WjPrince
 
WjPrince's Avatar
Anyone got a 1" headset cup remover I can borrow over the next week...?
I'm in Greenwich but would happily travel to collect.
  quote   reply
Old 2nd January 2013   #689
WjPrince
 
WjPrince's Avatar
anyone...?
  quote   reply
Old 2nd January 2013   #690
pharoahsandersdonor
 
pharoahsanders's Avatar
Open toolbox at Union Cycle Works in Deptford, first Saturday of each month?
http://www.unioncycleworks.org.uk/ne...sions_starting
  quote   reply
Old 2nd January 2013   #691
WjPrince
 
WjPrince's Avatar
yup...
That might be the solution.
But I was hoping to have the headset out to take the frame to Armourtex on Fri AM.
  quote   reply
Old 3rd January 2013   #692
ghostfacedonor
 
ghostface's Avatar
Yo. Does anybody have a Campagnolo Veloce BB tool I could borrow please? Camberwell/Brixton ideally, or at the least closer than SE10*

*pharoahsanders has one in SE10
  quote   reply
Old 5th January 2013   #693
OneLessCardigan
Does anyone have a headset press I could borrow? Or recommend a cheap one to buy? Don't really want to spend over 50 on smth I'll hardly ever need.u
  quote   reply
Old 5th January 2013   #694
OneLessCardigan
^^if the stars align and pharaoh sanders has a headset press, I'll collect the bb tool for you ghost face!
  quote   reply
Old 5th January 2013   #695
moogdonor
 
moog's Avatar
I have a X Tools headset press in SE14 you're welcome to. PM me if its any good for you
  quote   reply
Old 5th January 2013   #696
knyazb
 
knyazb's Avatar
Quote:
Originally Posted by OneLessCardigan View Post
Does anyone have a headset press I could borrow? Or recommend a cheap one to buy? Don't really want to spend over 50 on smth I'll hardly ever need.u
i got DIY one in E5 (Clapton)
  quote   reply
Old 5th January 2013   #697
rogandonor
 
rogan's Avatar
^ also have a DIY one in camden
  quote   reply
Old 5th January 2013   #698
ghostfacedonor
 
ghostface's Avatar
Quote:
Originally Posted by OneLessCardigan View Post
^^if the stars align and pharaoh sanders has a headset press, I'll collect the bb tool for you ghost face!
Ha, that would be fantastic if that's the case, thank you. Ding me a PM if so
  quote   reply
Old 5th January 2013   #699
OneLessCardigan
Thanks for offers. Rep all round. I've pm'd moog for the SE option!
  quote   reply
Old 5th January 2013   #700
pharoahsandersdonor
 
pharoahsanders's Avatar
sorry OLC no headset press
  quote   reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lockring tool Cupcakes Mechanics & Fixin' 24 22nd January 2009 20:29
Looking for a tool... DFP Mechanics & Fixin' 12 23rd September 2008 11:22
Campag BB tool... Turd Fergurson General 5 8th September 2008 09:30
Which tool..? the-smiling-buddha Mechanics & Fixin' 16 24th January 2008 20:56

All times are GMT. The time now is 00:33.
Creative Commons License, BY-SA v2.0
no new posts