London Fixed-gear and Single-speed SJS Cycles

DFP · 28th January 2009

Your a giant dan, sticking with 165's wouldve quite frankly be ridiculous.

SRD · 4th February 2009

Quote:

Originally Posted by SRD

If you are still after a frame then I've a 531 that used to be my fixed (forward facing horizontal dropouts). It's about 21inch, paint work is really really grotty, with a bit of surface rust coming through but structurally sound. It's an old Jacque Anquetil "mallet journe", inc fork and headset.
Can be collected from North Brum, between Erdington and Chester Rd stations. £20 should make me happy.

Quote:

Originally Posted by aeronaught

Still got this?

yep, still availible if you are interested?

I'm guessing that I can't do PMs 'cos I don't have the post count so you can contact me on sxd240 (at) bham.ac.uk

with an @ for the (at)

SRD · 4th February 2009

Quote:

Originally Posted by SRD

Can be collected from North Brum, between Erdington and Chester Rd stations

Quote:

Originally Posted by BlowieBen

That's not too far from me, I'm in Sutton

still up for grabs

DFP · 4th February 2009

Ive got a shimano ultegra/600 silver aero seatpost 27.2 its the standard length (300mm I think) Its very nice but I need a much longer one. Up for swaps.

DFP · 4th February 2009

I wouldnt mind that frame either. Race?

Give me your address if its not taken yet.

director at miahdesign .co.uk

pistaboy · 4th February 2009

I need some bullhorns please..... anyone want to sell?

DFP · 4th February 2009

Quote:

Originally Posted by pistaboy

I need some bullhorns please..... anyone want to sell?

Got some chopped drops. Aluminium, fairly narrow 26mm clamp I think.

Yours for free if we ever manage our lifting session.

pistaboy · 4th February 2009

You fancy friday morning Sham?
(that's damn decent of you as well mate... thanks)

BlowieBen · 5th February 2009

Quote:

Originally Posted by deadly fanny pack

Yours for free if we ever manage our lifting session.

You trying to beef up or something?

DFP · 5th February 2009

Nah beefing up is for queers.

Were just going burglaring

pistaboy · 5th February 2009

+1 ha,ha

aeronaught · 5th February 2009

Quote:

Originally Posted by deadly fanny pack

Ive got a shimano ultegra/600 silver aero seatpost 27.2 its the standard length (300mm I think) Its very nice but I need a much longer one. Up for swaps.

Shamim I am interested in this... what you after for the swap? I have a 330mm post I think.

Any sign of this hub? or are you posting about things you dont own again!? :)

DFP · 5th February 2009

Quote:

Originally Posted by aeronaught

Shamim I am interested in this... what you after for the swap? I have a 330mm post I think.

Any sign of this hub? or are you posting about things you dont own again!? :)

Yeah sorry about the hub thing, I got all indecisive and thought they were worth keeping.

But yeah, one here for you if you want it.

Whats your seatpost like? Im after something similar but longer - a retro silver thing.

Are you living in that place by ombersley road now? Remind me of the address and ill pop over when the weathers less harsh.

aeronaught · 5th February 2009

I have measured mine and it is the same as yours Shamim... 300mm.
I am still interested though if you want to sell it....

I have Also got:

380mm 27.2 carbon seat post
Deda 1-1/8, 90mm stem for OS bars

good prices if anyones interested?

aeronaught · 5th February 2009

Oh and yeah Il take that hub too!

bmx_fred · 6th February 2009

anyone got a seatpost, 25.4mm or 24mm?

mastershredder · 8th February 2009

anyone got a 17t sprocket (3/32 kind)?

aeronaught · 9th February 2009

Neeeeeed some rims... pref polished alu but any colour really.
any amount of holes.

Holler @ me!

any second hand ones at On Your Bike Dan?

os r · 9th February 2009

i have a good pair on shinny alu 700c rims hanging in my dads garage, from the early 80s, I forgot the make, but back in the day they were not notch, really light. how much did you want to pay, i can find out hole numbers/make etc. i was going to sell them on the bay but to lazy.

also anyone got a 24" disc wheel?

danwentskiing · 9th February 2009

there are some old ma3s on the stair rail, £14 each i think. nothing useful out the back i'm afraid - all tubular or 650c.

aeronaught · 9th February 2009

Quote:

Originally Posted by os r

i have a good pair on shinny alu 700c rims hanging in my dads garage, from the early 80s, I forgot the make, but back in the day they were not notch, really light. how much did you want to pay,

Sound like the ticket these... gimme a price big man!?

Dan I will pop over tomo aft for a butchers at these ma3s.

word.

DFP · 9th February 2009

I need a rear geared wheel, Ideally a mavic open4cd on a decent late 80/early 90's hub.

Also a good white saddle.

BlowieBen · 9th February 2009

what's the difference between open 4 and open 4 cd?

DFP · 9th February 2009

"couche dure", hard anodized Grey finish

Hyper Allah · 13th February 2009

Pow!
An associate of mine is looking to build his first 'fixed' but I think he might have fallen off his bike and knocked his head as he only wants campagnolo parts, with the exception of the frame.
Any of yous got some parts lying about that you could exchanged for some of the bank of England's finest?!

I'm also converting another bike to single speed and require some gentlemanly touring handlebars.

Cheers all.

DFP · 14th February 2009

He definetely fucked for sure (in the wallet that is)

You shouldve said earlier, me and harsheek went to a bike jumble today and came away with full of swag. There was tons of nice stuff there, including lots of campagnolo for 1/4 ebay prices.

pistaboy · 14th February 2009

share the wealth big fella.... what did you get exactly !

aeronaught · 14th February 2009

Shamim you are a dark horse.

what swag you got then? anything to sell... I still need a stem for some Cinellis dog!!!

DFP · 15th February 2009

Quote:

Originally Posted by aeronaught

Shamim you are a dark horse.

what swag you got then? anything to sell... I still need a stem for some Cinellis dog!!!

I wasnt expecting it to be as good as it was, only took £20 with me and ended up borrowing another £50 off harsheek in separate "please sir, just a little more" goes.

I grabbed a couple nice 3T stems (one with you in mind), which I think Cinelli's might just squeeze into.

Nothing to interest you dan sorry! Seriously, I was expecting it to be rubbish and overpriced. I couldve spent another 6hours there but I was all out of cash and all out of time.

BlowieBen · 15th February 2009

I really wanna go to a bike jumble. There's one in redditch at the end of the month I think.

bmx_fred · 15th February 2009

how do you find out about these jumbles?

BlowieBen · 15th February 2009

Found this today:
http://www.bikejumbles.co.uk/

aeronaught · 19th February 2009

WANTED.

A frame... 55 - 57cms anything!!!
Need it for a pub bike ennit... Dan. anything in yo Basement?

I will pay yo.

Word.

thomas · 19th February 2009

ive got an old Coventry Eagle frame in the cellar. Im not sure of the size. I'll get the tape measure out. Maybe even take a pic too.

aeronaught · 19th February 2009

Quote:

Originally Posted by thomas

ive got an old Coventry Eagle frame in the cellar. Im not sure of the size. I'll get the tape measure out. Maybe even take a pic too.

Do it mate... lemme know.

Hope your bike is still going strong, you managed to get a rear wheel?

mastershredder · 19th February 2009

got a 17t now. anyone got a 46t 135mm bcd (3/32") chainring?

danwentskiing · 19th February 2009

aeronaught - got no frames i'm afraid. i'll keep an eye open

DFP · 19th February 2009

Coventry Eagles are nice old commuters/cruisers/touring bikes usually for 27" wheels.

I have one, understated but quite nice in an 'old man' kinda way. Dont kill it, they are quite rare.

thomas · 20th February 2009

Quote:

Originally Posted by aeronaught

Hope your bike is still going strong, you managed to get a rear wheel?

Ive got a couple of options in the pipelines man. Im meeting Butty tomorrow at ideal to check out a rear wheel he's selling for his mate.

DFP · 23rd February 2009

I need a good quality rear road hub, can be old can be new. Ideally with a cassette or freewheel included. Will take a complete wheel if needs be.

Budget is modest though.

n3lson · 24th February 2009

When is Sprocket Cycles open?
Is it still in business?
I remember it was closed Monday and Tuesday, is that still right?
I cycle past there on my way home usually and it always seems closed!
Its a great shop too.

BlowieBen · 24th February 2009

Is anyone else going to go to the jumble in redditch and if so, can I have a lift? Otherwise it's gonna have to be the cross city line for Ben.

BlowieBen · 24th February 2009

ps Sprocket cycles was open when we had thew alleycat in october(?)

mastershredder · 25th February 2009

Quote:

Originally Posted by n3lson

When is Sprocket Cycles open?
Is it still in business?
I remember it was closed Monday and Tuesday, is that still right?
I cycle past there on my way home usually and it always seems closed!
Its a great shop too.

As far as i know sprockets is open wed-sat.

n3lson · 25th February 2009

cheers
10-4 wed-sat

BlowieBen · 1st March 2009

Redditch bike jumble was sweeeet, spent about £85, way more than I was expecting to. Saw adrian from sprocket there, he tried to sell me some hubs. I didn't buy them. Didn't see anyone else although I left just after 11. Can't wait for the one in Erdington.

DFP · 2nd March 2009

Quote:

Originally Posted by BlowieBen

Redditch bike jumble was sweeeet, spent about £85, way more than I was expecting to. Saw adrian from sprocket there, he tried to sell me some hubs. Can't wait for the one in Erdington.

Sharing all those same sentiments.

I think Adrian is making a stash.

You pick up anything nice? I was just confused at the one in worcester, if you have a build in mind & a shopping list of bits you need it would make it a lot easier.

MessenJah · 2nd March 2009

Hmm I dunno about 'making a stash'. He was too skint to lend me £1,000 to go to ECMC the other day.

I told him I'd pay him on time every month over the next ten years but he was having none of it!

BlowieBen · 2nd March 2009

Ye man I was totally out of my depth,got a few nice things. I'll show you the best thing I got at CM.. ooooooooohh the anticipation

n3lson · 2nd March 2009

Was it any kind of carbon wheel? I saw a trispoke one there but didn't ask the price.

and that giant cadex frame! old school....

Bookmarks	Shortcuts
Digg del.icio.us StumbleUpon Facebook Reddit Google	Posts	Categories

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car boot sales	Cuppa T	Miscellaneous & Meaningless	13	10th October 2009 16:10
For Sale: Colnago Master Piu F&F 54cm + Thomson post & Chris King h/s	benanza	Classifieds & Shopping	28	27th April 2009 17:28
Swaps or sales	countrybiker	Classifieds & Shopping	13	26th November 2008 15:20
For Sale: 2x Technics Mk2's (1200&1210) & M-audio MobilePre	audioknot	Classifieds & Shopping	11	15th November 2008 12:59
Suspicious GumBay Sales	\|³\|MA3K	Classifieds & Shopping	10	4th August 2008 12:41

28th January 2009	#51
DFP	Your a giant dan, sticking with 165's wouldve quite frankly be ridiculous.
	quote reply

4th February 2009	#54
DFP	Ive got a shimano ultegra/600 silver aero seatpost 27.2 its the standard length (300mm I think) Its very nice but I need a much longer one. Up for swaps.
	quote reply

4th February 2009	#56
pistaboy	I need some bullhorns please..... anyone want to sell?
	quote reply

5th February 2009	#60
DFP	Nah beefing up is for queers. Were just going burglaring
	quote reply

5th February 2009	#64
aeronaught	I have measured mine and it is the same as yours Shamim... 300mm. I am still interested though if you want to sell it.... I have Also got: 380mm 27.2 carbon seat post Deda 1-1/8, 90mm stem for OS bars good prices if anyones interested?
	quote reply

6th February 2009	#66
bmx_fred	anyone got a seatpost, 25.4mm or 24mm?
	quote reply

8th February 2009	#67
mastershredder	anyone got a 17t sprocket (3/32 kind)?
	quote reply

9th February 2009	#68
aeronaught	Neeeeeed some rims... pref polished alu but any colour really. any amount of holes. Holler @ me! any second hand ones at On Your Bike Dan?
	quote reply

9th February 2009	#69
os r	i have a good pair on shinny alu 700c rims hanging in my dads garage, from the early 80s, I forgot the make, but back in the day they were not notch, really light. how much did you want to pay, i can find out hole numbers/make etc. i was going to sell them on the bay but to lazy. also anyone got a 24" disc wheel?
	quote reply

9th February 2009	#70
danwentskiing	there are some old ma3s on the stair rail, £14 each i think. nothing useful out the back i'm afraid - all tubular or 650c.
	quote reply

9th February 2009	#73
BlowieBen	what's the difference between open 4 and open 4 cd?
	quote reply

13th February 2009	#75
Hyper Allah	Pow! An associate of mine is looking to build his first 'fixed' but I think he might have fallen off his bike and knocked his head as he only wants campagnolo parts, with the exception of the frame. Any of yous got some parts lying about that you could exchanged for some of the bank of England's finest?! I'm also converting another bike to single speed and require some gentlemanly touring handlebars. Cheers all.
	quote reply

14th February 2009	#76
DFP	He definetely fucked for sure (in the wallet that is) You shouldve said earlier, me and harsheek went to a bike jumble today and came away with full of swag. There was tons of nice stuff there, including lots of campagnolo for 1/4 ebay prices.
	quote reply

15th February 2009	#80
BlowieBen	I really wanna go to a bike jumble. There's one in redditch at the end of the month I think.
	quote reply

19th February 2009	#83
aeronaught	WANTED. A frame... 55 - 57cms anything!!! Need it for a pub bike ennit... Dan. anything in yo Basement? I will pay yo. Word.
	quote reply

19th February 2009	#84
thomas	ive got an old Coventry Eagle frame in the cellar. Im not sure of the size. I'll get the tape measure out. Maybe even take a pic too.
	quote reply

23rd February 2009	#90
DFP	I need a good quality rear road hub, can be old can be new. Ideally with a cassette or freewheel included. Will take a complete wheel if needs be. Budget is modest though.
	quote reply

24th February 2009	#91
n3lson	When is Sprocket Cycles open? Is it still in business? I remember it was closed Monday and Tuesday, is that still right? I cycle past there on my way home usually and it always seems closed! Its a great shop too.
	quote reply

1st March 2009	#96
BlowieBen	Redditch bike jumble was sweeeet, spent about £85, way more than I was expecting to. Saw adrian from sprocket there, he tried to sell me some hubs. I didn't buy them. Didn't see anyone else although I left just after 11. Can't wait for the one in Erdington.
	quote reply

2nd March 2009	#98
MessenJah	Hmm I dunno about 'making a stash'. He was too skint to lend me £1,000 to go to ECMC the other day. I told him I'd pay him on time every month over the next ten years but he was having none of it!
	quote reply

2nd March 2009	#100
n3lson	Was it any kind of carbon wheel? I saw a trispoke one there but didn't ask the price. and that giant cadex frame! old school....
	quote reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)